Audi Q5 Oil Change Guide - OEM Filter & Oil Spec by Year
The Audi Q5 is a popular model for both drivers and parts requests at audioemparts.com. Many Q5 owners look for the correct oil type, OEM filter, and service specifications for their vehicle. This guide lists verified OEM oil specs, filter details, and service information for every Q5 generation from 2009 to 2025.
Common oil change mistakes on the Q5 include using the wrong oil viscosity, installing a non-OEM filter, or reusing the drain plug gasket. Each can lead to leaks or engine problems. The following information helps you avoid these issues.
Why the Audi Q5 Oil Change Requires OEM Parts
The EA888 turbocharged engine in the Q5 requires oil and filters that meet Audi’s specifications for viscosity, bypass pressure, and filtration. Many aftermarket filters use different media or bypass valve settings. If a filter bypasses too early, it may not protect the engine during cold starts, when most wear occurs.
The Q5 uses a single-use aluminum crush washer on the drain plug. Once tightened, it deforms to seal the oil pan. Reusing the washer or installing a generic drain plug gasket is a common cause of oil leaks after a DIY oil change. Replace the crush washer with a new OEM part every time.
Audi Q5 Oil Spec and Filter by Generation
2009 to 2012 Q5 - First Generation 8R with 2.0T and 3.2 FSI
The first-generation Q5 uses either the EA888 Gen 1 2.0T turbocharged four cylinder or the 3.2 FSI naturally aspirated V6. Both engines require full synthetic oil meeting VW 502.00 specification in 5W-40 viscosity. Oil capacity is 4.8 quarts with the filter on the 2.0T and 6.6 quarts on the 3.2 FSI. The OEM oil filter on both is a cartridge style accessed from the top of the engine without needing to go under the vehicle, making this one of the cleaner DIY oil change jobs in the Audi lineup. Service interval is 10,000 miles or one year, whichever comes first. Replace the drain plug crush washer at every service without exception.
2013 to 2017 Q5 - First Generation 8R Refresh with 2.0T TFSI and 3.0T SQ5
The refreshed 8R Q5 uses the EA888 Gen 3 2.0T engine. Use VW 502.00 or VW 504.00 full synthetic oil in 5W-40 or 5W-30. Oil capacity is 4.8 quarts with the filter. Audi changed the filter housing design during this generation, so check your build date or VIN before ordering a replacement filter. The SQ5 uses the 3.0 TFSI supercharged V6 with a 6.6-quart capacity and the same oil specification.
2018 Q5 - Second Generation FY Early Production with 2.0T
The 2018 FY Q5 uses the EA888 Gen 3B engine. Oil spec is VW 502.00 or VW 504.00 in 5W-40. Capacity is 4.5 quarts with the filter. Because 2018 is a transition year, some late builds may have updated specs. Check your VIN before ordering parts.
2019 to 2024 Q5 - Second Generation FY with Updated 2.0T and SQ5 3.0T
For 2019 and newer, the Q5 2.0T uses VW 508.00 oil in 0W-20. This oil is not backward compatible with earlier Q5 engines. Using VW 508.00 in a pre-2019 Q5 that requires VW 502.00 can cause engine damage. The 2019 and newer SQ5 3.0T also uses VW 508.00 in 0W-20. Oil capacity is 4.5 quarts with the filter. Always check the oil sticker under your hood to confirm the correct spec.
Some FY Q5 models use a plastic drain plug. Replacing it with the OEM aluminum drain plug at your first oil change is a simple upgrade that addresses a common weak point on this generation.
2025 Q5 - Third Generation on the Premium Platform Combustion
The 2025 Q5 uses Audi’s new Premium Platform Combustion, also found in the redesigned A5. Oil spec is 0W-20 in VW 508.00, with a capacity of about 5.5 quarts including the filter. Since this platform is new, confirm your exact oil spec and parts using your VIN before ordering.
Drain Plug Torque Specification for All Q5 Generations
The drain plug torque for all Audi Q5 generations is 22 ft-lbs (30 Nm). Always use a torque wrench to avoid stripping the aluminum oil pan threads. The OEM crush washer seals properly when tightened to this spec.
OEM Filter vs Aftermarket on the Audi Q5
Audi warranty documents state that using non-OEM parts may affect coverage for related components. The genuine Audi oil filter for the Q5 matches the required bypass pressure, filtration rating, and anti-drainback valve performance for the EA888 engine. Aftermarket filters are not tested to these standards. At Audi OEM Parts, all oil filters are genuine Audi parts supplied from our authorized Audi Henderson dealership.
Audi Q5 Oil Change Service Interval
All Q5 models use Audi’s flexible service interval system, which tracks oil condition and driving habits. Under normal use, change the oil every 10,000 miles or once per year. For frequent short trips, towing, track use, or long idling, reduce the interval to 5,000 miles.
Frequently Asked Questions - Audi Q5 Oil Change
What oil does an Audi Q5 use?
It depends on your model year and engine. The 2009 to 2018 Q5 2.0T uses VW 502.00 or 504.00 in 5W-40. The 2019 onward Q5 2.0T uses VW 508.00 in 0W-20. The 3.2 FSI uses VW 502.00 in 5W-40. Always confirm via your VIN or the oil sticker under your hood.
Can I use 0W-40 instead of 5W-40 in my Q5?
Yes, in most climates, as long as the oil meets the required VW specification for your model year. 0W-40 flows faster at cold temperatures while providing the same high-temperature protection as 5W-40. Both meet VW 502.00 when properly certified.
Does the Q5 oil filter come with a new drain plug washer?
No. The OEM filter kit and drain plug gasket are separate items. Order both together when completing a full oil service on your Q5 at audioemparts.com.
Is VW 508.00 oil safe in my older Q5?
No. VW 508.00 is not backward-compatible and should never be used with a Q5 engine specified as 502.00 or 504.00. Using the wrong specification can cause permanent engine damage. Always verify your oil spec before ordering.
How do I check my Q5 oil level without a dipstick?
The Q5 uses an electronic oil level sensor. Park on a level surface, turn the ignition to accessory mode with the engine off and warm, then navigate to Vehicle, Service, and Oil Level on the MMI screen. The reading is most accurate five minutes after shutting off a warm engine.
Shop Genuine OEM Audi Q5 Oil Service Parts at Audi OEM Parts
You can find the correct OEM oil filter, drain plug, crush washer, and G13-compatible coolant for your Q5’s year and engine at Audi OEM Parts. All parts are genuine Audi OEM and VIN-verified for your vehicle. For help confirming fitment, contact [email protected].